Laser cut positioning kit, major improvement for Co2 lasers!

We designed this cross laser bracket for two reasons. 
-One the increased accuracy over a single blurry Red Dot side mount laser. The single red dot style laser at an angle changes alignment/start point because of geometry if changing focal depth. Sometimes cutting closer or further away to your workpiece is needed to give darker appearances. This makes alignment framing impossible on a single point red dot laser!  Also this style is very easy to bump out of alignment.  
-Second the ease of installing this bracket over a beam combining mirror setup, which can cause major headaches trying to realign mirrors. Follow these simple directions to improve your workpiece alignment and enjoy!   

These lasers are 3 to 5v DC!! Verify your current voltage is this before purchasing.  You will need to know how to strip wires and use an Allen key, very simple. 

You will need to measure your lens tube diameter.  This is not your lens diameter, message us with questions.  Sizes available are 16mm, 16.4mm, 20mm, 24mm, 25mm and custom diameters are available for and additional $5 cost. 

This kit includes the following : 
Laser lens tube bracket with hardware
Two 3-5v DC lasers
Wire coupling connector
Wire loom wrap 
Directions

Brands and styles of parts may change differ from photos.